HP 3000 Manual page 100

Syntax Messages
General Errors
NUMBER
202 INVALID SPECIFICATION TYPE-
COL 6 MUST BE H, I, O, OR F
1001 MORE THAN ONE HEADER SPEC XSORT specifications must begin with one, and only
1004 BEGIN/END COLUMN MISSING
OR INVALID NUMERIC
1005 BEGIN COL>END COL OR END
COL OUTSIDE OF RECORD
1012 BEGIN COL MUST BE BLANK
Header Errors
NUMBER MESSAGE
103 MUST BE SORTA, SORTC,
OR SORTR
151 NO CONTROL FIELD
LENGTH SPECIFIED
162 INVALID NUMBER IN OUT-
PUT RECORD LENGTH
FIELD
1002 BAD KEY RETENTION OPT-
-MUST BE BLANK OR X
1003 ASCENDING/DESCENDING
OPT INVALID-COL 18 MUST
BE A OR D
ALTSEQ MUST BE S OR
BLANK -COL 26
1025 PRINT OPTION (COL 27)
MUST BE 0, 1, 2, OR 3
B-102
MESSAGE
FURTHER EXPLANATION
Columns 7-12 must contain SORTA, SORTC, or SORTR.
Columns 13-17 must contain the largest sum of control field
lengths of any record section (in bytes)
Columns 29-32 must contain a valid numerical value.
Column 28 must contain either a blank, to retain control
fields on output records, or "X" to drop the control fields.
FURTHER EXPLANATION
Only exceptions are ALTSEQ records.
one, header specification.
For both Record Type and Field Description specifi-
cations, the "Location From/To" entries in columns 9-
16 must contain valid numeric values.
For both Record Type and Field Description specifi-
cations, the "Location From" entry in columns 9-12
must not be greater than the "To" entry in columns 13-
16. Also, the "To" value must not exceed the actual
record length of the XSORTIN file.
"From location" (Columns 9-12) must be blank or the
same as "To location" (Columns 13-16) for condition-
ally forced control fields.