HP 3000 Manual page 143

To compile, prepare, and run SIMCAL from within the RPG Interactive System Environment, you would
enter the commands below. The comments on the right are for your information and are not part of your
responses. While the Segmenter is executing, its HP banner and responses will appear on your screen. You
are expected to supply colon (":") prompts as required when entering the ":MPEcommand".
---------------------------------------------------------------------------------------
>T[EXT] SIMCAL
>V[ERIFY] R[PG]
>PRINT ALL RPGLIST
>V[ERIFY] P[REP]
>:FILE INPUT=$STDIN
>:FILE OUTPUT=$STDLIST
>RU[N] $OLDPASS
Alternatively, you could prepare SIMCAL manually using the commands listed below. Again, you will have
to supply colon prompts where they appear below. These are examples of the ":MPEcommand".
Copy SIMCAL to work file
RPG compile the work file into a
Prints compilation listing
Prepare USL to program file
Issue file equations for I/O
Execute SIMCAL
USL file
offline
2- 145