The remaining examples show lines added correctly with the prompt at column 6 (1). In line 9, the
R[EPEAT] parameter is again in effect (2). The display shows the results after two Input Specification
records are entered (3). After the second line is entered (line 10), the cursor will home up and prompt for
more text with line 11.
Line 11 shows the way in which you may use the L[IST] command in ADD mode if it is preceded by ">>"
(4). D[ELETE] and M[ODIFY] may also be used in this mode if preceded by ">>".
<Control Y> is entered at the start of line 11 to exit ADD mode. RISE prompts you for your next command
with the ">" (5).
2- 150