GE GEK-113045B Manual page 80

7.5 PROGRAMMING
Table 7–2: PROGRAMMING EXAMPLE (Sheet 3 of 4)
KEYPRESS DISPLAY
,
,
,
,
,
,
,
,
7
,
,
,
,
,
7-
10
Courtesy of store.ips.us
STALL TIME: 40 s
ENTER to modify
STALL TIME: 7 s
SCROLL to change
RUNTIME: 3.00 x ST
ENTER to modify
RUNTIME: 1.46 x ST
SCROLL to change
DC CT PRIM: 20 A
ENTER to modify
DC CT PRIM: 100 A
SCROLL to change
HIGH FIELD: 10.0 Ω
ENTER to modify
FIELD AMPS: OFF
ENTER to modify
FIELD AMPS: 45
SCROLL to change
FIELD VOLTS: 25
ENTER to modify
FIELD VOLTS: 125
SCROLL to change
INC SEQ DLY: 100 s
ENTER to modify
INC SEQ DLY: 15 s
SCROLL to change
REG PF: OFF
ENTER to modify
SPM Synchronous Motor Protection and Control
7 TESTING AND TROUBLESHOOTING
COMMENTS
SCROLL DOWN key to move to the STALL TIME setpoint then
SELECT/ENTER to select the setpoint
Change the existing value of STALL TIME to 7 seconds. SCROLL
Key(s) to select value of 7s and then SELECT/ENTER key to
accept new value
SCROLL DOWN key to move to the RUNTIME setpoint then
SELECT/ENTER to select the setpoint
Change the existing value of RUNTIME to 1.46 times the stall
time. SCROLL Key(s) to select value of 1.46 and then SELECT/
ENTER key to accept new value
SCROLL DOWN key to move to the DC CT PRIM setpoint then
SELECT/ENTER to select the setpoint
Change the existing value of DC CT PRIM to 100A. SCROLL
Key(s) to select value of 100 and then SELECT/ENTER key to
accept new value.
SCROLL DOWN key to move to the HIGH FIELD setpoint. This
value will remain as is.
SCROLL DOWN key to move to the FIELD AMPS setpoint then
SELECT/ENTER to select the setpoint.
Change the existing value of FIELD AMPS to 45. SCROLL Key(s)
to select value of 45 and then SELECT/ENTER key to accept new
value
SCROLL DOWN key to move to the FIELD VOLTS setpoint then
SELECT/ENTER to select the setpoint
Change the existing value of FIELD VOLTS to 125. SCROLL
Key(s) to select value of 125 and then SELECT/ENTER key to
accept new value.
SCROLL DOWN key to move to INC SEQ DLY setpoint then
SELECT/ENTER to select the setpoint
Change the existing value of INC SEQ DLY to 15 seconds.
SCROLL Key(s) to select value of 15 and then SELECT/ENTER
key to accept new value.
SCROLL DOWN key to move to REG PF set-point then SELECT/
ENTER to select the setpoint
GE Multilin