4 USER INTERFACE
4 USER INTERFACE 4.1 SPMPC SOFTWARE
This chapter provides all the necessary information to install and/or upgrade a previous installation of the
SPMPC software, and write/edit setpoint files.
The SPMPC software is only compatible with firmware versions 200 and higher.
NOTE
The following sections are included in this chapter:
•
System requirements
•
SPMPC software version for previous installation check
•
SPMPC software installation/upgrade procedure
•
SPMPC software system configuration
•
Creating/Editing/Upgrading/Downloading Setpoint Files
•
Printing Setpoints and Actual Values
•
Using Trending
The following minimum requirements must be met for the software to operate properly.
•
Processor: minimum 486, Pentium recommended
•
Memory: minimum 4 MB, 16 MB minimum recommended (540 K of conventional memory)
•
Hard Drive: 20 MB free space required before installation of PC program.
•
O/S: minimum Windows 3.1, Windows NT or Windows 95/98/2000 recommended
Windows 3.1 Users must ensure that SHARE.EXE is installed.
If a version of the SPMPC software is currently installed, note the path and directory name as this information
will be needed when upgrading.
GE Multilin
Courtesy of store.ips.us
SPM Synchronous Motor Protection and Control
4.1 SPMPC SOFTWARE
4.1.1 DESCRIPTION
4-
4
1