Reversing The Door Opening Side; Replacing The Illumination Lamp - Blomberg SSM 4460 XN User Manual

The internal temperature of your refriger-
ator can change due to the following reas-
ons:
• Seasonal temperatures;
• Opening the door frequently and leaving
it open for a long time;
• Placing foods in the refrigerator without
waiting for them to reach room temperat-
ure;
• The location of the refrigerator in the
room (e.g. exposure to sunlight).
You can adjust the varying internal temper-
ature due to such reasons using the ther-
mostat.
8 Maintenance and Cleaning
Read the "Safety Instructions" sec-
tion first.
Unplug the refrigerator before
cleaning it.
• Do not use sharp or abrasive tools to
clean the product. Do not use materials
such as household cleaning agents,
soap, detergents, gas, gasoline, thinner,
alcohol, wax, etc.
• The dust shall be removed from the vent-
ilation grill on the rear of the product at
least once a year (without opening the
cover). Clean the product with a dry cloth.
• Take care to keep water away from the
lamp's cover and other electrical parts.
• Clean the door with a damp cloth. Re-
move all contents to remove the door
and body racks. Remove the door racks
by lifting them upwards. Clean and dry
the shelves, then attach back in place by
sliding from above.
• Do not use chlorinated water or cleaning
products on the exterior surface and
chromecoated parts of the product.
Chlorine will cause rust on such metallic
surfaces.
7.2 Reversing the Door Opening
Side
The door opening side of your refrigerator
can be reversed according to the place you
put it. When you need this, you should def-
initely call the nearest Authorized Service.

7.3 Replacing the Illumination Lamp

Call the Authorized Service when the Bulb/
LED used for lighting in your refrigerator
will be replaced.
Lamp(s) used in this appliance cannot be
used for house lighting. Intended use of
this lamp is to help the user place food into
the refrigerator / freezer safely and com-
fortably.
• Do not use sharp and abrasive tools,
soap, house cleaning materials, deter-
gents, gas, gasoline, varnish and similar
substances to prevent deformation of the
plastic part and removal of prints on the
part. Use warm water and a soft cloth for
cleaning, and then dry it.
• On the products without a No-Frost fea-
ture, water droplets and icing up to a
thickness of a finger may occur on the
rear wall of the freezer compartment. Do
not clean, and never apply oils or similar
materials.
• Use a mildly dampened micro-fibre cloth
to clean the external surface of the
product. Sponges and other types of
cleaning clothes may cause scratches.
• To clean all removable components dur-
ing the cleaning of the interior surface of
the product, wash these components
with a mild solution consisting of soap,
water and carbonate. Wash and dry thor-
oughly. Prevent contact of water with illu-
mination components and the control
panel.
EN / 17
EN
DA
FI
NO