Table of Contents
Advertisement
3. If you selected USB, make sure to connect the USB drive to the USB connector on the imagePRESS Server.
NOTE:
If the capacity of the USB flash drive is less than size of the value listed in Estimated size: field, the backup process will not take
place.
4. Click Continue.
To restore the backup image
1. In the Backup and Restore window, click Fiery System Image.
2. In Fiery System Image, click Restore.
If you have not logged in as an Administrator user, you are required to do so. Enter the administrator's password, and click
Log In.
3. Make sure that your backup image is accessible from the imagePRESS Server.
If you want restore the backup image stored on the USB flash drive, attach the USB flash drive to one of the USB 3.0 ports
on the imagePRESS Server.
4. Select one of the following restore options:
• Restore from a local image
• Restore from a USB storage device
• Restore from the factory default image
5. Click Continue.
6. Follow the on-screen prompts to restore the backup image.
NOTE:
The imagePRESS Server must remain powered ON during the backup or restore process.
To restore the system by booting from a bootable USB flash drive
Follow the instructions described in
You need to connect a monitor, keyboard, and mouse to the imagePRESS Server.
"Using bootable USB storage device to restore" on page
70
5. PERFORMING BACKUP AND RESTORE
75.
Advertisement
Table of Contents
