Canon ImagePRESS Server H350 V2 Service Manual page 3

Copyright
The copyright of this document belongs to Canon Inc. This document may not be copied, reproduced or translated into another
language, in whole or in part, without the prior consent of Canon Inc.
Copyright CANON INC. 2020
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential information.
Explanation of Symbols
The following symbols are used throughout this Service Manual.
Symbols
1x
1x
1x
1x
1x
1x
Explanation
Check.
Check visually.
Check a sound.
Disconnect the connector.
Connect the connector.
Remove the cable/wire from the
cable guide or wire saddle.
Install the cable/wire to the cable
guide or wire saddle.
Remove the screw.
Install the screw.
Symbols
Remove the claw.
1x
Insert the claw.
1x
Push the part.
Connect the power cable.
Disconnect the power cable.
Turn on the power.
Turn off the power.
Loosen the screw.
1x
Tighten the screw.
1x
Important Notices
Explanation