Canon ImagePRESS Server H350 V2 Service Manual page 34

■ To shut down, restart, or reboot from the Fiery QuickTouch
NOTE:
Notify the site administrator before you remove the imagePRESS Server from the network.
1. Make sure that the imagePRESS Server is not receiving, processing, or printing any jobs.
If Printing appears on the Fiery QuickTouch, the imagePRESS Server is processing. You must wait until the system finishes
and reaches Idle before restarting or shutting down.
If the system has just finished processing, wait at least five seconds after the system reaches Idle before beginning the
shutdown procedure.
2. On the Fiery QuickTouch Home screen, press the Quick Options menu button (see
options" on page 22).
3. Do one of the following:
• To shut down the imagePRESS Server, select Shutdown system.
• To reboot the entire system including the operating system, select Reboot system.
• To restart only the imagePRESS Server system software, select Restart server.
4. At the confirmation screen, select OK.
Allow the system to shut down and power off or restart.
If you selected Restart server, you may need to wait one minute or more for the server software to restart.
Before accessing internal components, make sure that all cables are disconnected from the back of the imagePRESS Server.
3. USING THE IMAGEPRESS SERVER
27
"Overview of Fiery QuickTouch menu