Available Paper Types; Using The Paper Guide - Epson FX-2190 Reference Manual

Available paper types

The table below shows the types of paper you can load and the
paper slots you can use with each paper type. See "Adjusting the
Paper-Thickness Lever" on page 15 for instructions on how to
adjust the paper-thickness lever.
Paper type
Ordinary paper
Multipart forms (carbonless)
2 parts (original and one copy)
3 parts (original and two copies)
4 parts (original and three copies)
5 parts (original and four copies)
6 parts (original and five copies)
Envelopes
Note:
❏ When the temperature is 5°C (41°F) or lower, or 35°C (95°F) or
higher, set the paper-thickness lever one position lower to improve
print quality.
❏ When the temperature is 5°C (41°F) or lower, or 35°C (95°F) or
higher, multipart forms with 7 parts cannot be used.
❏ Do not load paper that is curled or has been folded.

Using the paper guide

Using the paper guide that comes with your printer, you can load
one single sheet or envelope at a time from the top of the printer.
Your single-sheet paper can be up to 257 mm (10.1 inches) wide
on the FX-890 and 420 mm (16.5 inches) wide on the FX-2190. (See
"Printer Specifications" on page 207 for detailed paper
specifications.)
50 Paper Handling
Available paper slot(s)
front and rear
front
rear