You can also load a stack of single-sheet paper using the optional
cut-sheet feeder. See "Loading Single Sheets" on page 49 for more
information. See "Cut-Sheet Feeder" on page 171 for information
on the optional cut-sheet feeder.
Setting the Paper Release Lever
When you load continuous paper in the printer, you need to set
the paper release lever to indicate the paper source you want to
use, as described in the table below.
The table below describes each paper release lever position.
Paper
release
lever
position
14
Paper Handling
Description
Single-sheet position
For loading single-sheet paper from the top or front slot.
See "Loading Single Sheets" on page 49 for instructions.