Transporting The Printer - Epson FX-2190 Reference Manual

Caution:
c
❏ Never use alcohol or thinners to clean the printer; these
❏ Be careful not to get water on the printer mechanism or
❏ Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants; unsuitable
oils can damage the printer mechanism. Contact your EPSON
dealer if you think lubrication is needed.

Transporting the Printer

If you need to transport your printer some distance, carefully
repack it using the original box and packing materials.
Follow these steps to repack the printer in its original packing
materials:
Warning:
w
You need to move the print head by hand to remove the ribbon
cartridge. If you have just used the printer, the print head may be
hot; let it cool for a few minutes before touching it.
1. Remove any paper loaded in the printer. Make sure the
printer is turned off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer. If an optional
cut-sheet feeder is installed, remove it.
3. Remove the paper guide. If any options are installed, remove
them and pack them in their original boxes.
226 Product Information
chemicals can damage the printer components as well as the
case.
electronic components.