Epson FX-2190 Reference Manual page 151

The printout has extra blank lines between lines of text.
Cause
Two line feed commands are
being sent at the end of each
line of text, because the
printer's auto line feed setting
is on.
The line space setting in your
application software is
incorrect.
The printer prints strange symbols, incorrect fonts, or other
inappropriate characters.
Cause
Your printer and computer are
not communicating correctly.
The wrong character table is
selected in your software.
The printer you want to use is
not selected in your software
Your application software is
not configured correctly for
your printer.
What to do
Turn off the auto line feed setting using
the printer's default-setting mode. See
"Changing default settings" on page
122.
Adjust the line space setting in your
application software.
What to do
Make sure that you use the correct
interface cable and that the
communications protocol is correct. See
"Electronic" on page 210 and your
computer documentation.
Select the correct character table using
your software or the default-setting
mode. The character table setting in your
software overrides settings made in the
default-setting mode.
Choose the correct printer from the
Windows desktop or in your application
before printing.
Make sure that your application
software is configured correctly for your
printer. See your application
documentation. If necessary, install or
reinstall the printer driver software as
described in the Setup Sheet.
Problem Solver
5
5
5
5
5
5
5
5
5
5
5
5
145