Loading Single Sheets - Epson FX-2190 Reference Manual

Advancing paper to the tear-off position automatically
To automatically advance your printed documents to the tear-off
position, turn on the auto tear-off mode and select the appropriate
page length for continuous paper in the Default Setting mode. See
"Changing default settings" on page 122 for instructions on how
to change the default settings.
When auto tear-off is on, the printer automatically advances the
paper to the tear-off position whenever it receives a full page of
data or a form feed command followed by no more data.

Loading Single Sheets

As shown below, you can load ordinary single sheets and
envelopes one at a time from the top of the printer, using the paper
guide.
You can also load single-sheet paper using an optional cut-sheet
feeder, front sheet guide, or front paper guide. See "Cut-Sheet
Feeder" on page 171 or "Front Sheet Guide and Front Paper
Guide" on page 188 for more information.
Paper Handling
2
2
2
2
2
2
2
2
2
2
2
2
49