Printing Position Problems - Epson FX-2190 Reference Manual

Single-sheet paper is in the
paper path.
Continuous paper is not
loaded properly.
The paper-thickness lever is
not set correctly.
The printer does not feed continuous paper to the standby
position.
Cause
You have not torn off the
printed pages before pressing
the Load/Eject button.

Printing position problems

Wrong top-of-form position
Your printing appears too high or low on the page.
Cause
138 Problem Solver
Press the Load/Eject button to eject the
sheet.
See "Loading Continuous Paper" on
page 17 for instructions on loading
continuous paper with the tractor you
want to use.
Set the paper-thickness lever to match
the thickness of your paper. See
"Adjusting the Paper-Thickness Lever"
on page 15 for instructions.
What to do
Tear off the printed pages at the
perforation. Then press the Load/Eject
button to feed the paper backward to the
standby position.
What to do