Epson FX-2190 Reference Manual page 54

Note:
If the Tear Off/Bin light is flashing, the paper is in the tear-off
position. If you press the Tear Off/Bin button again, the printer
feeds your paper to the next top-of-form position.
2. Press the Tear Off/Bin button. The printer advances the paper
to the tear-off edge.
c
Note:
If your paper's perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
function as described in "Adjusting the tear-off position" on page
62.
3. Tear off the printed document using the tear-off edge of the
printer cover.
4. To feed the continuous paper backward out of the printer and
into the standby position, press the Load/Eject button.
To remove the remaining paper from the printer, press the
Load/Eject button to feed the paper backward to the standby
position. Then open the sprocket covers of the tractor and remove
the paper.
Caution:
c
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time may
cause a paper jam.
48 Paper Handling
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the top-of-form position.