Sanyo CAR-5040 Series User Manual page 91

Power Cycle System
Hard Reset (Restart)
■ 5.5.2 About the Remote KVM
The KVM, which is started using the WebGUI, allows user to control user's servers
operating system remotely, using the screen, mouse and keyboard, and to redirect local CD
and diskette(floppy) drives as if they were connected directly to the server.
The screen, mouse and keyboard functionality allows user to use the operating system
and other GUI-based programs, instead of restricting user to the command-line-based
utilities provided by terminals and emulators.
The ability to redirect CD and diskette drives allows user to download and upload
software to and from the server as if user was accessing its own CD and diskette drives.
■ 5.5.3 Starting the Remote Console Application (vKVM)
With Administrator or Operator privilege level, user can modify configuration settings
and click the Apply Changes button to execute the settings, as well as click either the
Launch vKVM or Launch vMedia buttons to launch the Applet JNLP file.
The following steps will show how to start Remote Console Application from WebGUI:
Step 1. Log in to the LOM as Administrator to reach the WebGUI.
Step 2. Select Remote KVM Conf. to enter Configuration page.
Step 3. Click vKVM enable button then click Apply Changes.
As Fig. 5.5.2, users need to click the Enabled checkbox to enable vKVM function.
The detail description of Remote KVM Configuration will show in Table 5.5.2.
CAR-5040 Series User's Manual
All manuals and user guides at all-guides.com
Turns off, and then reboots the system (cold boot).
Reboots the system without turning it off (warm boot).
頁 91