Table of Contents
Advertisement
The following steps will show how to configure IPMI from WebGUI:
Step 3.
Log in to the LOM as Administrator to reach the WebGUI.
Step 4.
From the Event Management tab, select IPMI.
User will see the Network Security page screen as Fig. 5.7.11. In this page, user can
configure the relative parameter of IPMI. The detail description of IPMI field will show in
Table 5.7.8.
Fig. 5.7.11 IPMI configuration screen for serial and console
Field Name
Enable IPMI Over LAN
Channel Privilege Level
Limit
Encryption Key
CAR-5040 Series User's Manual
All manuals and user guides at all-guides.com
Table 5.7.8 Field description of IPMI configuration
Description
Enables IPMI Over LAN when the checkbox is checked.
Sets the maximum privilege level that can be accepted on the LAN
channel (Administrator, Operator or User).
Sets the Encryption Key. This field allows from 0 to 20 two-digit Hex
characters and no spaces.
頁 126
Advertisement
Table of Contents
