Table 100-29: If The Target Temperature Is Exceeded, The Control Automatically Opens Cold-Water Valves Instead Of Hot-Water Valves; Table 100-30: List Of Substitute Valves If Programmed Valve Is Not Available; Table 100-31: List Of Substitute Valves For Additional Intake After Target Level Reached - Miele PW 6 7 Series Technical Information

Table of Contents

Advertisement

PW 6xx7
If the programmer selects "user-defined" and programs water inlet valves 1 to 4,
then generally optimal water intake (without additional heating) will not occur. If
the programmer selects only hot-water valves and/or forces a rise above the
target temperature, the control reacts with a cold-water intake via the following
alternative valves:
Actual temperature > Target temperature
W1
W2
WD
Table 100-29: If the target temperature is exceeded, the control automatically opens
cold-water valves instead of hot-water valves.
If valves are programmed for the water intake that do not exist in the machine,
the control substitutes these for others as shown in the following table:
Programmed valve
K1
K2
K3
K4
K6
KD
KH
W1
W2
WD

Table 100-30: List of Substitute Valves if Programmed Valve is Not Available

After the target level has been reached, valves K3 and K4 should not be
activated during any additional intake. If the programmer has selected only
these valves, the control will operate substitutes as shown in the following
table:
Programmed valve - Water intake 1
K3
K4
Table 100-31: List of Substitute Valves for Additional Intake after Target Level
Reached
Inlet valve summary:
Designation on
wiring diagram
1Y5
2Y5
1Y6
2Y6
3Y6
1Y9
Substituted with
K1
Substituted with
K2
Substituted with
KD
Substitute valve activated by control
KD
KD
KD
KD
KD
K1
KD
WD
WD
W1
Substitute valve activated by control during
additional intake
KD
KD
Description
Inlet valve – Cold,
hard water, direct
Inlet valve – Cold,
hard water direct
Inlet valve – Cold
water pre-wash
Inlet valve – Cold
water, main wash
Inlet valve – Cold
water, rinses –
Fabric conditioner
Inlet valve – Hot
water, pre-wash
81
Technical Information
Detergent
Symbol
dispenser
compartment
-
-
-
-
1
2
3, at front
1
Designation in
software/
documentation
HAW, optional
hard water kit
HAW, optional
hard water kit
K1 / KAW1
K2 / KAW2
K3 / KAW3
W1 / WAW1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pw 6107Pw 6137Pw 6167Pw 6207

Table of Contents