Service; Programming Mode - Miele PW 6 7 Series Technical Information

Technical Information
4

Service

4.1

Programming Mode

Initial requirements:
 A wash program must not be in operation.
 The machine must not be in the service mode.
Accessing:
1. Switch on the machine.
2. Wait until the Welcome start screen is displayed.
3. Press the language selection button (under the flag symbol) to access the
main menu.
4. Select Operator Level and confirm with the OK button.
5. Enter the password and confirm with the OK button.
6. Select Programming and confirm with the OK button.
Acknowledgement indicator:
Successful accessing of the programming mode is indicated by Operating
level>Programming in the top line of the display. The options Create new,
Copy, Delete and Modify are then available.
Options:
The following is the internal structure of the program header for a Profitronic
M washing machine:
Item # in
Item Description
Table
1 Program number
2 Program name
3 Part number
4 Area 1
5 Name Area 1
6 Area 2
7 Name Area 2
8 Area 3
Options Details
Allocation of program position #, e.g.,
1 to 999 123. Default # set as standard at the
factory will be the lowest vacant #.
All available
Allocation of program name. Max. name
alphanumeric and
length 25 characters, e.g., Cottons 40ºC.
special characters
Programmer only. If the programmer
creates a new program, this field is filled
with Xs ("xxxxxxxx"). Production factory
only is able to enter an 8-digit mat. no. to
All numbers
identify a genuine Miele program, e.g.,
"06110050". Whenever an original
Miele program is modified, this
number must be deleted immediately!
Sets # of individual blocks in area 1, e.g.,
none if No is set. If programmer selects
No, 1 to 10 blocks
at least one block here, a name for the
area must be entered. Default setting: No
All available Allocation of name for area 1. Default
alphanumeric and setting: Pre-wash. Max. name length 20
special characters characters, e.g., Pre-wash cold.
Sets # of individual blocks in area 2, e.g.,
10 blocks if 10 blocks is set. If
No, 1 to 10 blocks programmer selects at least one block
here, a name for the area must be
entered. Default setting: No
All available Allocation of name for area 2. Default
alphanumeric and setting: Main wash. Max. name length 20
special characters characters, e.g., Main wash 90°C.
Sets # of individual blocks in area 3, e.g.,
4 blocks if 4 blocks is set. If programmer
No, 1 to 10 blocks
selects at least 1 block here, a name for
the area must be entered. Default: No.
66
PW 6xx7