Control Supply And Control Input From Separate Sources; Soft Start, Soft Stop And Stop, Control Supply And Control Input From The Same Source; Soft Start, Soft Stop And Stop, Control Supply And Control Input From Separate Sources - GE ASTAT XT QT 0008U Series User Manual

Control Supply and Control Input from Separate Sources

8.4
Notes:
• Use this diagram when Control Supply
and Control Input voltages are not
from the same source.
• Connect terminal 21 as per section 8.1
page 62.
• Supply must be protected for short
circuit and over load. 6A fuse is
recommended.
• It is recommended to use a separate
fuse for the auxiliary circuits.
8.5

Soft Start, Soft Stop and Stop, Control Supply and Control Input from the Same Source

Notes:
• Switch A can be used as an immediate
stop.
Switch B is used as a soft stop
•
command to the ASTAT-XT.
• Switch C is used as a momentary or
maintained start command to the
ASTAT-XT.

Soft Start, Soft Stop and Stop, Control Supply and Control Input from Separate Sources

8.6
See notes to section 8.5.
• Application diagrams
64