Panasonic KX-NS700 Feature Manual page 439

[Performance of Pressing the VM Transfer Button and Entering an Extension Number]
Switching to VM command + Recording
message command (#6 + H [H = Mailbox
No.])
[Example]
CO Line Call
d.
Listening to a Recorded Message
If the VPS receives a message, the VPS will set the Message Waiting feature on the
corresponding telephone to notify the extension user that there is a message waiting in his
mailbox. The Message button light of the extension will turn on (→ 13.1.3 Message Waiting),
thereby notifying the extension user that there is a message waiting in his mailbox. When the
Message button light turns on, pressing the button allows the extension user to play back the
messages stored in his mailbox without dialing such as a mailbox number. It is programmable
whether the PBX or the VPS cancels the Message Waiting feature (e.g., turning off the Message
button light).
→ 11.12.1 PBX Configuration—[3-12-1] Group—VM(DTMF) Group—System Settings—Others—
Message Waiting Lamp Control
When the PBX is selected, the Message Waiting feature is canceled after the extension user has
accessed the VPS. When the VPS is selected, the Message Waiting feature is canceled after the
extension user has listened to messages stored in his mailbox.
[Performance of Pressing the MESSAGE Button]
Switching to VM command + Listening
message command
(#6 +
[Example]
Document Version 2017-06
In AA Service Mode
PBX
Extension
(Operator)
In AA Service Mode
H [H = Mailbox No.])
Transmitted Command
Recording message command (H [H =
Mailbox No.])
Sent "#6" + "103".
mailbox number
Switching to VM command
Transfer with VM Transfer
button + extension number (103)
VPS (In AA service mode)
VM Port 1
VM (DTMF)
Group
VM Port X
Transmitted Command
Listening message command ( H [H =
Mailbox No.])
21.1.5 Voice Mail DTMF Integration
In VM Service Mode
VM Port 2
VM Port 3
In VM Service Mode
Feature Manual 439