Panasonic KX-NS700 Feature Manual page 362

19.1.2 Tenant Service
–
Tenant 1: Entries 1 to 50
–
Tenant 2: Entries 51 to 100
–
Tenant 3: Entries 101 to 150
:
–
Tenant 8: Entries 351 to 400
If "Same as System Setting" is selected, then all 1000 entries in the table will be applied to that
tenant's outgoing calls. All 1000 entries in the table are applied when ARS is enabled, regardless of the
tenant's ARS Mode.
By dividing tenants, specific ARS settings can be applied to specific tenants according to the
requirements of each tenant.
The following example illustrates how the ARS Leading Number Table is applied to tenants:
Tenant No.
1
2
3
4
5
•
The following features used by incoming call distribution (ICD) group are determined by the tenant
number assigned to them (→ 10.1.1 ICD GROUP FEATURES):
–
The Music on Hold heard by a caller while waiting in a queue.
–
The Time Table used by the ICD group to determine the current time mode. An overflow destination
and Queuing Time Table can be assigned for each time mode.
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
→PBX Operator—Day, Lunch, Break, Night
→BGM and Music on Hold—Music on Hold
10.4 PBX Configuration—[2-4] System—Week Table
10.5 PBX Configuration—[2-5] System—Holiday Table
10.7.2 PBX Configuration—[2-7-2] System—Class of Service—External Call Block
10.7.3 PBX Configuration—[2-7-3] System—Class of Service—Internal Call Block
11.2 PBX Configuration—[3-2] Group—User Group
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main—
Tenant Number
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—User Group
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main—User Group
13.1 PBX Configuration—[5-1] Optional Device—Doorphone—Tenant Number
13.5 PBX Configuration—[5-5] Optional Device—External Sensor—Tenant No.
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
14.6 PBX Configuration—[6-6] Feature—Tenant
16 PBX Configuration—[8] ARS
16.5 PBX Configuration—[8-5] ARS—Carrier—Authorization Code for Tenant
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—Tenant Number
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Tenant Number
362 Feature Manual
ARS Mode
On for Local Access Operation
Off
Same as System Setting (System
Setting: On)
On for Local Access Operation
Off
Applied ARS Entries
Entries 1 to 50
Not applied
Entries 1 to 1000
Entries 151 to 200
Not applied
Document Version 2017-06