Operator Features - Panasonic KX-NS700 Feature Manual

Feature Manual References
7.1.3 Flexible Buttons
23.1 Capacity of System Resources
Operating Manual References
1.3.48 One-touch Dialing

14.1.7 Operator Features

Description
Any extension or Incoming Call Distribution (ICD) group can be designated as an operator.
This PBX supports the following types of operators:
Type
PBX operator
Tenant operator
Operator Call:
An extension user can call an operator by dialing the preprogrammed Operator Call feature number. The
destination of the Operator Call depends on the following:
–
If the Tenant Service is not in use:
The call is directed to the PBX operator according to the corresponding time mode.
–
If the Tenant Service is in use:
The call is directed to the extension's tenant operator. If a tenant operator is not assigned, the call is
directed to the PBX operator. In this case, the current time mode of the extension's tenant is used to
determine the PBX operator that the call is directed to.
If neither a tenant operator nor a PBX operator is assigned, the caller will hear a reorder tone.
Conditions
•
An extension or ICD group can be assigned as both a tenant operator and the PBX operator.
•
The same tenant operator can be assigned as the operator for multiple tenants.
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM—PBX Operator—Day, Lunch, Break, Night
14.6 PBX Configuration—[6-6] Feature—Tenant—Operator (Extension Number)
PT Programming Manual References
[006] Operator Assignment
Feature Manual References
19.1.2 Tenant Service
23.1 Capacity of System Resources
Document Version 2017-06
An extension or ICD group can be assigned as a PBX operator for each time
mode (day/lunch/break/night).
An extension or incoming call distribution group can be assigned as a tenant
operator. The tenant operator may be the extension or ICD group of another
tenant.
[Example] Extension 110 in tenant 1 is the tenant operator of tenant 3.
Description
14.1.7 Operator Features
Feature Manual 241