Panasonic KX-NS700 Feature Manual page 201

When the original destination is:
•
PS Ring Group
•
External Pager (TAFAS)
•
Analog/ISDN Remote Maintenance
•
Other PBX Extension (TIE with no PBX Code)
Intercept Routing for DISA will redirect a call only if all of the Direct Inward System Access (DISA) ports are busy. If Intercept
*1
Routing is activated after a call from DISA reaches the destination extension, the Intercept Routing settings assigned to that
extension will be applied.
By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and assigning Intercept Routing
*2
destinations to the Virtual PS, calls to these destinations will be redirected to the Intercept Routing destination of the Virtual PS.
Programming Example
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
<Intercept Destination of Virtual PS>
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming CO line call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
[Available Intercept Destination]
The following can be used as intercept destinations:
Wired Extension (PT/SLT/SIP Extension)
PS
ICD Group
PS Ring Group
UM Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Document Version 2017-06
*2
*2
FWD Destination
2001
...
Day
2001 1001
... ...
Intercept Destination
The Available Intercept Destination is:
Not assignable (Intercept Routing is not available.)
"600" is an example of a
Floating Extension No.
for the External Pager
600
...
Intercept Destination
Lunch Break Night
1001 1001 1001
... ... ...
10.1.12 Intercept Routing
...
...
...
Availability
Feature Manual
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
201