Table of Contents
Advertisement
Removing the Seat
Assembly
1.
Push the seat assembly forward to the raised
position
(Figure
26).
2.
Slide the seat assembly to the side out of the
pins, and lift the seat assembly upward
27).
Figure 27
1. Pins
Installing the Seat
Assembly
Slide the seat assembly onto the pins and lower the
seat assembly
(Figure
Figure 28
1. Pins
(Figure
28).
Lubrication
Greasing the Machine
Service Interval: Every 100 hours/Yearly (whichever
Grease Type: No. 2 lithium grease
1.
Use a rag to wipe the grease fitting clean so that
foreign matter cannot be forced into the bearing
or bushing.
2.
With a grease gun, apply 1 or 2 pumps of grease
into the grease fittings on the machine.
3.
Wipe the excess grease off the machine.
The grease fittings are located at the inner end of the
control arms, the tie-rod ball joint, and the outer end
of the control arms
g190187
g190186
34
comes first)—Grease the bearings
and bushings. Grease the machine
more frequently when using it for
heavy-duty operations.
(Figure 29
and
Figure
Figure 29
Figure 30
30).
g034057
g034058
Advertisement
Table of Contents
