Lubrication; Greasing The Machine - Toro 08743 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Every 100 hours
Lubricate the grease fittings with No. 2 lithium grease.
1. Wipe the grease fitting clean so that foreign
matter cannot be forced into the bearing or
bushing.
2. Pump grease into the bearing or bushing.
3. Wipe up excess grease.
4. Lubricate the following bearings and bushings:
•
1 Front wheel bearing
Figure 19
•
1 Traction-pedal pivot bearing
Figure 20
(Figure 19).
g002714
(Figure 20).
g002715
•
5 Rear hitch bearings
Left side and center grease fittings shown
•
1 Steering pivot bearing
Note:
The flush fitting on the steering pivot
requires a grease gun nozzle adapter. Order
Toro Part No. 107-1998 from your authorized
Toro distributor.
•
1 Steering cylinder rod end bearing—Model
08705 only
22
(Figure 21).
Figure 21
(Figure 22).
Figure 22
(Figure 23).
g002716
g007452