NEC NEAX 2400 IPX Programming Manual page 61

To cancel CALL FORWARDING-ALL CALLS-D
1. Lift the handset or press the "SPEAKER" key; receive Dial Tone.
2. Press the CALL FORWARDING-ALL CALLS-D
The LED of the associated feature key will go out. The LCD displays:
term
[D Series III]
FWD CNCL
(Time Display)
3. Replace the handset or press the "SPEAKER" key.
To set CALL FORWARDING-ALL CALLS-D
1. Lift the handset or press the "SPEAKER" key.
2. Press the multi-line appearance; receive Dial Tone. Then press CALL FORWARDING-ALL CALLS-D
PRI feature key; receive Special Dial Tone.
3. Dial the desired target station number; receive Service Set Tone. The LED of the associated feature key does
not light at the station setting the service. If the multi-line appearance is another D
station's feature key LED will light. The setting station's LCD displays:
term
[D Series III]
FWD SET
(Time Display)
4. Replace the handset or press the "SPEAKER" key.
5. If the target station is the Attendant, the LCD displays:
term
[D Series III]
FWD SET
(Time Display)
To monitor CALL FORWARDING-ALL CALLS-D
line:
1. Press the multi-line appearance. Then press the CALL FORWARDING-ALL CALLS-D
key. The LCD displays:
term
[D Series III]
FWD SET
(Time Display)
CALL FORWARDING-ALL CALLS-D
term
-PRI from My-line:
term
-PRI feature key; receive Service Set Tone.
term
[D Series E]
FORWARD CANCEL
term
-PRI for multi-line appearance other than the My-line:
TARGET
term
STATION
[D Series E]
XXXX FORWARD SET
(Time Display)
term
[D Series E]
OPR FORWARD SET
(Time Display)
term
-PRI for a multi-line appearance other than the My-
TARGET
term
STATION
[D Series E]
XXXX FORWARD SET
(Time Display)
NDA-24305
(Time Display)
term
XXXX
term
-PRI
term
-
's My-line, that
TARGET
STATION
XXXX
OPR
term
-PRI feature
TARGET
STATION
CHAPTER 5
Page 43
Revision 1.0