L-42D Last Number Called-D Term -Pri - NEC NEAX 2400 IPX Programming Manual

LAST NUMBER CALLED-D
L-42D LAST NUMBER CALLED-D
1. General Description
This feature allows a D
term
feature, the D user can choose any destination out of the latest five calls, which have been stored in the
memory of the system, and place a call without having to redial the full number.
Note: The maximum digits of the destination is 32 digits.
2. Operating Procedure
1. How to check the dialed numbers stored in the memory (up to 5 destinations):
(a) Press the LINE/SPD key on a D
• The Prime Line lights Green.
• The Speaker Lamp lights Green.
• Receive Dial Tone from the speaker with the following display on the D
term
[D Series III]
LNR [#]/SPD [ ] – 1
(a) Press the LINE/SPD key on the D
• The Prime Line lights Green.
• The Speaker Lamp lights Green.
• Receive Dial Tone from the speaker with the following display on the D
term
[D Series III]
LNR [#]/SPD [ ] – 2
The indication on the display is changed in sequence by pressing the LINE/SPD key. Once the stored
Note:
telephone number display reaches "LNR[#]/SPD[ ]-5", "LNR[#]/SPD[ ]-1" appears again by pressing
the LINE/SPD key.
CHAPTER 5
Page 104
Revision 1.0
term
-PRI
term
-PRI
term
user to redial the telephone numbers previously dialed from the terminal. With this
term
.
811625643
term
again.
25191
NDA-24305
term
[D Series E]
LNR [#]SPEED [ ] – 1
811625643
term
[D Series E]
LNR [#]/SPEED [ ] – 2
term
.
term
.
25191