Did Addressing - NEC NEAX 2400 IPX Programming Manual

DID ADDRESSING

D-123 DID ADDRESSING
1. General Description
This feature provides for a called-party number received via ISDN to be used to designate the station at which
the call is to terminate.
2. Operating Procedure
No manual operation is required.
3. Programming
1. When the called party number and terminating station number are the same.
STEP 1: Assign the Basic Data for ISDN (Refer to
STEP 2: ARTD - Assign the number of digits of the called line to the parameter DC (CDN 66) of the routes
CALLED PARTY
NUMBER
438-3000
438-3001
438-3100
438-3101
STN: 3000
STN: 100
2. When the called party number and terminating station number are different (Number Conversion).
CHAPTER 6
Page 176
Revision 1.0
of the B-channel and D-channel of the 24 PRT which interfaces with the ISDN line with
DID Addressing.
Note: Specify "DC" on a route basis.
Example of Office Data Assignment for DID Line (No Digit Conversion)
TERMINATING STATION No.
PBX
DID NO. 438-3000
DC = 4
DID NO. 438-3100
DC =3
Chapter 3.)
3000
3001
100
101
ISDN
NDA-24305
DC REMARKS
When the number of digits for
4
the station number is 4.
When the number of digits for
3
the station number is 3.
CALLING PARTY