Station Individual Trunk Access-Pri - NEC NEAX 2400 IPX Programming Manual

STATION INDIVIDUAL TRUNK ACCESS-PRI

S-107 STATION INDIVIDUAL TRUNK ACCESS-PRI
1. General Description
This feature permits a station to access an individual ISDN trunk via dial access.
2. Operating Procedure
To access:
1. Lift the handset; receive the Dial Tone
2. Dial the feature access code, trunk route number, trunk number, and desired station number; receive the
Ringback Tone.
3. When the called party answers, communication can begin.
3. Programming
STEP 1: ASYD - System Data 1, Index 68, bit 1: Designates the method the Attendant Console must use to
STEP 2: ANPD - Reserve a number level for this access code. CI=N.
STEP 3: ASPA - Assign an access code for this service. CI=Normal, SRV=SSC, SID=17.
STEP 4: ARTD - If the Central Office Code option is assigned, assign data "1" in CDN 25.
STEP 5: ACOC - If the Central Office Code option is assigned, trunks in the system must be programmed to
STEP 6: ASFC - Allow the restriction. SFI39=1.
CHAPTER 5
Page 150
Revision 1.0
System Data 1, Index 68, bit 4: Is Trunk Select Key in service? 0/1: No/Yes. Assign data
have an associated Central Office Code. This code is dialed after pressing the Attendant
Console's Trunk Select key.
operate INDIVIDUAL TRUNK ACCESS. 0/1: Route &
Trunk Number/Listed Directory Number (Central Office
Code, ACOC)
1.
Optional
NDA-24305