NEC NEAX 2400 IPX Programming Manual page 289

2. Rerouting Function
To prevent keeping a hold on the unnecessary line, the line from the calling party to the forwarded
destination is newly established when SS-CT service is successful. LCDs of stations concerned with this
service are shown below.
Station A:
Station B:
Station C:
1) Station A originates a call to Station B. LCD display on Station A is "3001" and LCD display on Station B
term
is "TRANSFER" (D
Station A
(2001)
2) Station B transfers the call to Station C and Station C answers the call.
LCD display on Station A is "3001", LCD display on Station B is "TRANSFER" (D
term
(D Series III) and LCD display on Station C is "3001".
Station A
(2001)
3) As Station B is released from the connection, a new call is automatically originated from Station A
to Station C and the line used for Station A through Station C is reestablished.
LCD display on Station A is "4001" and "2001" is displayed on Station C's LCD.
Station A
(2001)
: IS-11572 or Q-SIG
CALL TRANSFER SUPPLEMENTARY SERVICE (SS-CT) WITH REROUTING
Calling Party
Called Party (Forwarding Party)
Forwarded Party
term
Series E) or "XFR" (D
CALL
Station B
(3001)
CALL
Station B
(3001)
DISCONNECTED
Station B
(3001)
NDA-24305
Series III).
Station C
(4001)
TRANSFER
Station C
(4001)
NEWLY
ESTABLISHED LINK
Station C
(4001)
term
Series E) or "XFR"
CHAPTER 6
Page 271
Revision 1.0