Channel Parameter Settings "Same For All Channels; Parameter Window "Channel Parameters - ABB i-bus BDB/S 1.1 Product Manual

®
ABB i-bus EIB / KNX
3.2.4 Channel parameter settings
"Same for all channels"
3.2.4.1 Parameter window "Channel parameters page 1 of 2"
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
If the option Same for all channels is selected in the parameter Channel
parameter settings in the parameter window General is selected, the
following parameter window appears
Fig. 8: Parameter window "Channel parameters page 1 of 2"
Channel selection
This parameter serves as a note or remark.
This indicates in the parameter window General in the parameter Channel
parameter settings that the option Same for all channels has been selected.
Note: All further parameters can be taken from the description in the
chapter channel parameter settings "Individual for each
channel".
27