Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
3.2
Parameters
3.2.1
"General"
parameter window
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Note:
The standard settings for the options are underlined,
e.g. yes/no.
Fig. 4:
"General" parameter window
Channel parameter settings
Note:
No acceptance of parameters with change from
"Same for all channels" to "Individual for each channel"
Options:
Individual for each channel/
Same for all channels
With this parameter you set if the channels are set individually for the
35 channels or set the same for all channels.
Option Individual for each channel = the option enables the individual setting
of each channel separately.
Option Same for all channels = if the option is selected the settings under
the parameter window "Channel parameters" apply for all channels.
Note:
Please note that the values which are set to the same values
for all channels, when converted individually for each channel
they are not transferred to each individual channel. The
individual setting must be repeated for each channel.
12
Advertisement
Table of Contents
