Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Cyclic switch position recall (only if cyclic recall greater than 0)
Options:
no/yes
Option no = do not recall switch position
Option yes = recall switch position
With this parameter recall of the switch position is activated.
Note:
The cycle time for this purpose is set in the parameter Switch
positions cyclic recall every [0...255 hours, 0 = deactivated]
in the parameter window "General".
If the switch positions are recalled cyclically, ensure that on the
recalling device, e.g. a switch actuator channel, the R flag is set
in the communication object to be recalled. Otherwise the Data
Logging Unit can not recall the switch position.
18
Advertisement
Table of Contents
