ABB i-bus BDB/S 1.1 Product Manual page 10

®
ABB i-bus EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Device technology
Supplied state
The Data Logging Unit is supplied with the physical address 15.15.255.
The application program is pre-installed. Hence, only group addresses and
parameters must be loaded during commissioning. The entire application
can be reloaded as required. A longer downtime may result if the application
program is changed or after a discharge.
Assignment of the physical address
The assignment and programming of the physical address is carried out
in the ETS.
Cleaning
If devices become dirty, they can be cleaned using a dry cloth. Should a dry
cloth not remove the dirt, they can be cleaned using a slightly damp cloth
and soap solution. Corrosive materials or solutions should never be used.
Maintenance
The device is maintenance-free. No repairs should be carried out by
unauthorised personnel if damage occurs (e.g. during transport or storage).
The warranty expires if the device is opened.
10