Required Pc Specifications; Wireless Communication Specifications - Canon CXDI-80C Service Manual

5.5 Required PC specifications

Use of the CXDI-80C Wireless requires a PC (hereinafter image capture computer) running
Microsoft Windows 7 and on which CXDI Control Software NE (Ver. 1.40 or later) or CXDI
Controller RF (Ver. 1.40 or later) made by Canon has been installed, and hardware that satisfies
the required specifications must be procured from a Canon sales company or agent. For details
of the required specifications of the image capture computer, refer to the CXDI Control
Software NE (Ver. 1.40 or later) or CXDI Controller RF (Ver. 1.40 or later) service manual.

5.6 Wireless communication specifications

The relay unit used for wireless communication between the CXDI-80C Wireless and Image
Capture Computer is called a wireless LAN access point. The table below lists the wireless
communication specifications.
Item
IEEE standard
Frequency band
Communication
(encryption
system
Communication
Communication
environment
conditions
1 .
1 .
Security
system)
Channel
bonding
range
• Do not place any structures that
Ambient
will block the wireless signals
between components of the system.
O v e r v i e w
O v e r v i e w
Details
IEEE 802.11n
5 GHz/2.4 GHz
WPA2-PSK
(AES)
ON (40 MHz)
(Recommended)
Within 8 meters
- 10 -
Remarks
AES is an encryption
system which has been
certified by the
National Institute of
Standards and
Technology (NIST) of
the United States.
Channel settings are
used to avoid
interference in
adjacent imaging
rooms.
Recommended in
order to meet detector
specifications.