Replacing The Pca-Xif Board; Removing The Pca-Xif Board - Canon CXDI-80C Service Manual

3.2.2 Replacing the PCA-XIF board

3.2.2.1 Removing the PCA-XIF board

1) Remove the eight screws (XB1-2300-606) used to secure the PCA-XIF board.
2) In order to pull the LAN cable connector, AC adapter connector (DC inlet) and LED of the
PCA-XIF board out through the holes in the base, lift the PCA-XIF board in the direction
shown by the red arrows in the figure, and remove it.
PCA-XIF board
4. Repair Guide
LAN cable connector
- 5 -
XB1-2300-606 screws (x 8)
LED
AC adapter connector
X-ray interface box base