Service (H5) - Panasonic Brooks FireTracker FT1020G3 Operation Manual

Service (H5)

26
Menu H5 can be used to display certain information to help during commissioning an
installation or maintaining existing system (e.g. when you power up and when you are
programming a Control Unit / system).
Only authorised personnel have access to menu H5 and a password for level 3A (Service
technician) is required.
Some tasks for service technician can be carried out via a PC and EBLWin:
Download / backup (upload) the Site Specific Data (SSD)
•
• Create and download software (S/W), settings, configurations, Control Unit and
system properties.
Create and download the user definable text messages (alarm texts) shown in the
•
display of the Control Unit and Display units (if used).
Note: To be able to log on to an FT1020G3 FDCIE via a PC using EBLWin, the PC has to
be provided with an EBLWin key (5094). This USB device has a number (a key) required
for the log on.
Via a PC and TLON Manager you can create and download (install) the TLON network
configuration (TLON project).
135
Operation Manual
FT1020G3 Rev 2.10.4