Table of Contents
Advertisement
25.4
Sensor Values (H4/U4)
Action
"Menu"
Scroll to menu H4.
"↲"
Scroll to menu U4.
"↲"
"↲"
"↲"
"ESC"
Text in display
H4 Present system status
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
U4 Sensor values
Start sensor: 000000
For an Analog multi detector 4300 / 4400 in NORMAL mode:
Sensor: 001-01 (technical address 000001)
Momentary: XX.X%/m
Perf factor: X.XX%/m
Algorithm: X-XX
Momentary: XX°C
Algorithm: XX
For an Analogue heat detector 3308 / 3309 in NORMAL mode:
Sensor: 001-03 (technical address 000002)
Momentary: XX°C
Algorithm: XX
For an Analogue multi detector 4400 in Advanced mode:
Sensor: 001-01 (technical address 000001)
Momentary: XX.X%/m
Perf factor: X.XX%/m
Algorithm: Xxxxxx
Momentary: XX°C
For an Analogue multi detector with isolator 4400I in Advanced mode:
Sensor: 001-01 (technical address 000001)
Momentary: XX.X%/m Weekly: XX.X%/m
Perf factor: X.XX%/m
Algorithm: Normal
Momentary: XX°C
Install date: XXXX-XX-XX
Start sensor: 000000
U4 Sensor values
Weekly: XX.X%/m
Min: XX.X%/m
Max: XX.X%/m
Min: XX°C
Max: XX°C
Min: XX°C
Max: XX°C
Weekly: XX.X%/m
Min: XX.X%/m
Max: XX.X%/m
Min: XX°C
Max: XX°C
Min: XX.X%/m
Max: XX.X%/m
Min: XX°C
Max: XX°C
129
Operation Manual
FT1020G3 Rev 2.10.4
Comments
According to chapter
"Access", see page 42.
Write the technical
number and/or press "↲"
to start as from sensor
000001.
If there are no sensors
(analogue detectors)
when "↲" is pressed, the
list view will not open.
It is a list in which you
can scroll with "▼" or
"▲".
Write another technical
number and press "↲" or
press "ESC".
Scroll to another menu
or press "ESC".
Advertisement
Table of Contents
