Table of Contents
Advertisement
25.6
Technical Warning (H4/U6)
A technical warning is an event that is neither a fire alarm nor a fault. It is information to
indicate that an event has occurred as a result of activating a programmable input. The text
message, shown in the FDCIE display, is user definable message (up to 40 characters).
One or more activated technical warnings are indicated by
Action
"Menu"
Scroll to menu H4.
"↲"
Scroll to menu U6.
"↲"
"ESC"
Note: The technical warnings are normally non-latching, but can via EBLWin be set to be
"latched".
If a programmable input is activated with a latched technical warning, the technical warning
must be reset via this menu.
Technical warnings can be used to activate programmable output.
Note: Three new features are provided in software versions ≥ V2.8.x. A technical warning
can be set via 3 check boxes for the following:
1.
2.
3.
Text in display
H4 Present system status
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
U6 Technical warning
Technical warning text message
19-02-2013 09:09:15
(User definable text message)
19-02-2013 19:09:35
1 to 2 of 2
U6 Technical warning
Show technical warning on the main screen.
Technical warning latched.
Turn the FDCIE buzzer ON when technical warning is activated.
132
Operation Manual
FT1020G3 Rev 2.10.4
in the display's symbol area.
Comments
According to chapter
"Access", see page 42.
If there are no technical
warnings, --List is
empty-- will be shown.
It is a list in which you
can scroll with "▼" or
"▲".
Scroll to another menu
or press "ESC".
Advertisement
Table of Contents
