Section One: Introducing The 972; Caution; Checking The 972 Package - NorthStar 972 Installation Manual

Networked navigation system
Hide thumbs Also See for 972:
Table of Contents

Advertisement

SECTION ONE: Introducing the 972

Caution

This processor module must be handled with reasonable care and protected from the following;
• Moisture - Do not mount this processor in unprotected areas of the vessel having
moisture.
• Vibration and shock - Use of the supplied shock/vibration mount is a mandatory part of
the installation. Only mount this unit in a horizontal position with adequate space for
ventilation, maintenance and for field service removal. Rough handling during removal or
installation can cause premature failure of internal components.
• Radar interference - Do not install the processor or its associated cabling in areas exposed
to interference from radar, high powered transmitters or large-current-carrying cables. The
processor should be mounted as far as possible below the beam of radar antennas.
Flybridge installations of the processor are not recommended and should be avoided. Installations in
these areas require special provisions for shielding and the installation design must provide total
protection from any moisture.
Problems caused by moisture, vibration and interference are not covered by warranty.
The processor must be mounted in a horizontal position so that its heat management system can
work correctly.
For advice regarding equipment placement, please consult with an authorized BNT-ME Servicing
Dealer before beginning the installation.
To locate a Northstar Servicing Dealer near you call 978-897-6600 or consult the Northstar/BNT
Marine website: www.northstarnav.com

Checking the 972 package

The Northstar 972 is a networked color GPS navigation family that you can connect to a wide variety
of optional equipment, including the Northstar 491 echo sounder, Northstar radar, and VGA displays.
Other optional interfaces include any NTSC- or PAL-compatible video sources, such as a video
camera, TV, DVD, or VCR. For installation instructions for the Northstar 491, see the Northstar 491
Installation Manual (P/N GM495). For the Northstar Ethernet Radar, see the Northstar Ethernet Radar
Installation Manual (P/N GMEKRadIM).
972 Installation Manual, Rev. B
Attention Installers:
Page 1

Advertisement

Table of Contents
loading

Table of Contents