Installing Firmware And Pld Code - Canon CXDI-40G COMPACT Service Manual

12.3 Installing Firmware and PLD Code

1) Purpose
Install the Firmware and PLD code into the Flash ROM of the PWB-Di board in the
imaging unit.
2) Notes
Be sure to check that the CXDI is connected to the system.
3) Procedure
3-1) Installing the firmware
Write the firmware by referring to "3.Firm Write Tool Software (Firmwrite.exe)" in the
Tool Software Operation Manual.
Where to write: PWB-Di board
3-2) Installing PLD code
Write PLD code by referring to "2.HUB PLD Write Tool Software (pldwrite.exe)" in the
Tool Software Operation Manual.
Where to write: PWB-Di board
2 . I n s t a l l a t i o n
2 . I n s t a l l a t i o n
- 54 -