Settings; Checking And Setting The Date And Time - Canon CXDI-40G COMPACT Service Manual

12. Settings

12.1 Checking and Setting the Date and Time

1) Purpose
The date and time is set to Japan standard time at factory shipment.
Reset the date and time to your local value as necessary.
2) Procedure
2-1) When CXDI application start, open the ADMINISTRATOR SETUP MENU.
SYSTEM → SETUP MENU → ADMINISTRATOR SETUP
2-2) When the "ADMINISTRATOR SETUP MENU" appears, and presses the [DATE]
button.
2-3) The dialog (Date / Time Properties) appears, and set the value properly each of the
fields which the tab sheet (Date Time and Time Zone sheet) has. And then press [OK].
2. Installation
- 51 -