Canon CXDI-40G COMPACT Service Manual page 95

Parameter
-v
This parameter dumps the
transfer log.
-V filename
This parameter dumps the
transfer log.
-I
A-RELEASE-RES is
ignored.
-jn
This is the time to take
timeout.
-k
level = 0
1
2
Note
The parameters -p, -v, and -V filename display the log on the console. Therefore, be sure
to always erase these parameters before operation by the user.
In the past, -k2 was used to fix troubles, but it has now been set as the default has been changed
to -k2 to ensure precise compliance with the DICOM code. At sites wishing to adhere to their
existing window values, -k1 should be used.
level: 0:Do not delete DICOM tags.（Transfer all headers similar to storage.)
1:Delete Groups 0008, 0010, 0018, 0019 and 0020.
2:Delete Groups 0008, 0010, 0018, 0019, 0020 and Elements (0028,0030), (0028,1050),
(0028,1051), (0028,1052), (0028,1053), (0028,1054). Default
Note
In Ver.4.21, attach -k2 expressly to produce similar output. The previous option had -k1
as its default. The k option defaults to -k2, if k option is not specified.
Image Pixel Spacing (0028,0030)
Window Center (0028,1050)
Window Width (0028,1051)
Rescale Intercept (0028,1052)
Rescale slope (0028,1053)
Rescale Type (0028,1054)
For groups 0008, 0010, 0018, 0019, 0020, refer to DICOM conformance statement.
2 . I n s t a l
2 . I n s t a
Meaning
* This parameter is used simply
as "-v"
* This parameter is used to set
the transfer software so that
the debugging character
string is displayed on the
console.
* Both the -p and -v parameters
should be used. These
settings override the -s
parameter.
* The parameter is used for
analysis after the transfer
software saves the debugging
character string displayed on
the console to a file with a
designated filename.
It is used only when
problems occur.
* This parameter is used simply
as "-I"
* Sets the time to take timeout
in seconds.
* The -k option has been
implemented to normalize
DICOM headers
- 75 -
l a t i o n
l l a t i o n
* This parameter does not affect DICOM
data transfer.
* This parameter does not affect DICOM
data transfer.
* This is used when the error message
[130012 Peer aborted Association (or
never connected)]occurs even though
the DICOM data transfer was
successful.
This is used based on the connected
printers.
* This parameter is to be changed when
taking timeout.
Description