Panasonic LP-RF Series Setup & Maintenance Manual page 71

„ Switch the user
1.
Select the user icon on the upper right of the screen.
The "User selection" dialog appears.
2.
Select the user from "Restricted user" or "Administrator", and select "OK".
To select the "Administrator", enter the password if it was set and select "OK".
The password is also required when you establish an online connection between
your PC and laser marking system.
„ When password is forgotten
If you have forgotten the password for the administrator, delete the password according to the following procedure:
1.
If the laser marker is in the remote mode, turn the remote mode
OFF.
To deactivate remote mode, select the "Operation" in the ribbon.
In the dialog, select "Remote/RUN OFF".
• Do not delete the password with the remote mode ON.
2.
Exit the Laser Marker NAVI smart when it is started up.
3.
Double-click and execute "ClearPassword.exe" included in the attached CD-ROM "Laser Marker Smart Utility".
You can find "ClearPassword.exe" at the following location of the CD-ROM.
CD-ROM\Tools\ClearPassword.exe
• During the "ClearPassword.exe" running, it does not matter whether the laser marker and PC are connected or not.
4.
Check the box next to "Clear the password" on the screen
displayed, and then, click "OK".
Remote mode ON
ME-LPRF-SM-11
"Operation" tool
Remote mode OFF
71