1-5-2 Controller
Front
1.
Key switch: POWER
The main power switch for the laser marker.
Turn ON ( | ) the key switch to start-up the system, and turn OFF ( ○ ) to shutdown the
system.
Only when the key switch is turned OFF (in O position), the key can be pulled out.
When the laser marker is not in use, the key should be in safekeeping by a laser safety
manager.
In case of turning ON the power supply after turning OFF, leave the interval five seconds or more between ON and
OFF.
Do not turn off the power supply while the system starts (while "PLEASE WAIT" is displayed on the panel).
2.
Controller display panel
The indicator that shows the status of the laser marker. Refer to "3-2-3 Operation of controller display panel" (P.61).
Laser marker status and backlight color
Normal operation: White
No.
Description of the icons
During the normal operation, the file number is displayed.
q
When any alarm or warning has been occurred, the error information is displayed.
w
Indicates laser pumping is on.
e
Indicates laser marker is in remote control mode (operated by an external device).
r
Tapping this icon moves to the model information (system clock information, model name, serial number,
t
and etc.) display.
Tapping this icon moves to the panel language selection.
y
4
2
4
1
5
ME-LPRF-SM-11
6
3
Alarm generation: Red
Warning generation: Pink
w
i
31