Panasonic LP-RF Series Setup & Maintenance Manual page 62

No. Description
Language
t
selection
y
u
i
o
1)
1!
*1 : The system clock can be adjusted in system settings screen of Laser Marker NAVI smart.
*2 : When the optional network unit is installed to the controller, the type of the network (EtherNet/IP or PROFINET), IP
address, and the version are displayed. If the network unit is not installed, the optional network is indicated as "None"
or "-----".
„ Settings of controller display panel
The backlight color and language of the display panel can be changed by Laser Marker NAVI smart.
1.
Establish an online connection between your PC and the laser marking system.
2.
Go to the "System settings" screen.
3.
Select "Operation/information" tab.
4.
Configure the settings under "Controller display" if needed. Select the display panel color from white, pink or red at
following status respectively.
• Normal status (Initial setting: white)
• Warning status (Initial setting: pink)
• Alarm status (Initial setting: red)
• When an alarm of error No. E000 to E199 occurs, the
display color always becomes red regardless of this setting.
5.
Select the display language of the controller panel.
• English
• Japanese
• Simplified Chinese
• The display language can be changed also with the controller panel directly.
6.
Select "Apply to laser marking system" on the left side of the ribbon.
The configured items will be applied to the laser marker.
62
Touch the language to select. The error information is displayed in the selected language.
• English
• Japanese
• Simplified Chinese
Indicates laser pumping is on. (including the incomplete period)
Indicates laser marker is in remote control mode (operated by an external device).
Tapping this icon moves to the model information display.
Tapping this icon returns to the previous display.
Tapping this icon moves to the next display.
Tapping this icon moves to the panel language selection.
ME-LPRF-SM-11
"Apply to laser marking
system" tool