5-4 Checking the communication commands
Check the communication commands transmitted and received by the laser marker using the command history function in
the PC configuration software "Laser Marker NAVI smart".
The command history is displayed with the following procedures.
1.
Establish an online connection between your PC and the laser marking system.
2.
Go to the "Maintenance" screen.
3.
Select "Command history" tab. Up to 100 command messages received or sent by the laser marker are shown in the
list.
• When a code reader is connected to the RS-232C port of the laser marker, the transmitted and received data with the
code reader is not recorded in the command history.
• In the command history you can also confirm the commands transmitted via optional network unit (EtherNet/IP or
PROFINET).
134
ME-LPRF-SM-11