Panasonic LP-RF Series Setup & Maintenance Manual page 178

7.
Make sure that the 4 cable tie fixtures are in the controller
as shown in the figure. If not, put the fixtures attached to
the optional contactor unit to the places as indicated.
• Put the each cable tie fixture with the directions indicated in
the figure.
• Use the cable ties and fixtures attached to the optional
contactor unit. If you use incorrect parts, it may cause a
product failure.
8.
Connect the two connectors of the
contactor to the controller.
9.
Set the cable ties attached to the
optional contactor unit to the 4 fixtures
and fix the cables of the contactor unit.
• Use the cable ties and fixtures attached
to the optional contactor unit. If you use
incorrect parts, it may cause a product
failure.
178
125
Unit: mm
Cable tie
ME-LPRF-SM-11
15
15
70
20
Connector